Heavy-duty joint profiles


  • for heavy loads
  • suitable for all types of covering
  • visible surface in stainless steel
  • narrow visible surface


resistant to heavy loads, trafficable by fork-lift trucks, perforated bearing legs guarantee the best connection to the substrate/covering


all industrial applications, shopping centres, railway stations, airports, exhibition halls


substructure hot-dip galvanised steel and visible surface stainless steel V2A (V4A on request), K/VA foam material in the central section

Covering Types

asphalt, coating, concrete, screed, industrial coverings, natural and stone slabs


industrial trucks (lifting trucks, fork-lifts etc.), passenger cars, trucks

Formed parts

corner piece, T-piece, cross piece


Depending on the floor covering, we recommend installing a grouting seal between the joint profile and the covering to prevent the hairline crack caused by the building physics.

Technical data

Movement horizontal:
6 mm (±3 mm)
Movement vertical:
2 mm (±1 mm)
Visible width:
45 mm
Maximal joint width:
20 mm
Load rating:
wheel load 5000 kg up to Ø 150 mm, B = 100 mm
Load rating trucks:
600 kN (DIN 1072)
Load rating forklifts:
150 kN (DIN 1055-3)
Supply length:
3 mtr


Article No. Profile height (h) Recess (BxT)
VA.6.45/30 28 mm 210 x 38 mm
VA.6.45/40 38 mm 210 x 48 mm
VA.6.45/50 48 mm 210 x 58 mm
VA.6.45/70 68 mm 210 x 78 mm
Technical design
Subject to technical change without notice