Formed parts - joint profile / channel combinations

Regular formed parts for joint profile/channel combination

The following formed parts are available as standard for all joint profile / channel combinations:

  • corner pieces
  • T-pieces
  • cross pieces
  • floor-wall connections

For more information on formed parts, see formed parts - joint profiles and formed parts - drain channels.

Joint profile channel intersections - a specialized system solution

We offer specialized system solutions for right-angle intersections of joint profiles and drain channels.

90° Joint profile channel intersection

The joint profile runs continuously through the drain channel. This allows joint movements to be reliably accommodated even in the area of the drain channel, while at the same time ensuring continuous linear drainage.

Technical Note: This design is only possible with a grid width of at least 150 mm and a construction height of at least 60 mm.

System example: joint profile VA.8.95/20 and drain channel ALR.4.150/60

90° Joint profile channel intersection with wall upstand

The joint profile runs continuously through the drain channel and is terminated with an upstand at the rising wall. This allows joint movements to be reliably accommodated even in the area of the drain channel, while at the same time ensuring continuous linear drainage.

Technical Note: This design is only possible with a grid width of at least 150 mm and a construction height of at least 60 mm.

System Example: joint profile VA.8.95/20 and drain channel ALR.4.150/60 W1