- high load-bearing capacity
- lightly structured surface with anti-slip effect
- with general building authority test certificate
We are also available by phone for further questions.
watertight, resistant to heavy loads, expansion insert can be replaced anytime, abrasion, weather and temperature resistant (-40°C bis +120°C), resistant to salt and waste-water (alcalics, microbes, bacteria), agreements may also be made for other sealing sections
outdoor, multi-storey and underground park decks, ramp accesses, pedestrian bridges
hot-dip galvanised steel substructure and high-grade steel V2A surface, synthetic rubber flexible insert (EPDM), sealing insert made from Wolfin IB
asphalt, screed, natural and stone slabs
passenger car, trucks
upstand, membrane upstand, corner piece, T piece, cross piece, transition floor to wall
The sealing and flexible inserts are connected using M8 bolts positioned at intervals of 150 mm.
The sealing insert wich is looking on the sides of the profile out, has to be connected properly with the sealing system. This is very important to get a watertight result of the joint-profile.
For profile height 38 mm minimum joint width 75 mm.
Our engineers and technicians can be of assistance during installation on request.
- Movement horizontal:
- 80 mm (-30/+50 mm)
- Movement vertical:
- 30 mm (±15 mm)
- Visible width:
- 135 mm
- Maximal joint width:
- 100 mm
- Load rating trucks:
- 600 kN (DIN 1072)
- Supply length:
- 3 mtr
- Color of flexible insert:
|Article No.||Profile height||Recess (B⨉T)|
|VA.8.135/37 F||38 mm||1000 ⨉ 48 mm|
|VA.8.135/42 F||43 mm||1000 ⨉ 53 mm|
|VA.8.135/52 F||53 mm||1000 ⨉ 63 mm|
|VA.8.135/62 F||63 mm||1000 ⨉ 73 mm|
|VA.8.135/92 F||93 mm||1000 ⨉ 103 mm|