VA.8.135/.. FK

  • high load-bearing capacity
  • low profile height
  • lightly structured surface with anti-slip effect

Inquiry data sheet

Für weitere Fragen stehen wir auch telefonisch zur Verfügung.


VA.8.135/.. FK


watertight, resistant to heavy loads, expansion insert can be replaced anytime, abrasion, weather and temperature resistant (-40°C bis +120°C), resistant to salt and waste-water (alcalics, microbes, bacteria)


outdoor, multi-storey and underground park decks, ramp accesses, pedestrian bridges


hot-dip galvanised steel substructure and high-grade steel V2A surface, synthetic rubber flexible insert (EPDM), sealing insert made from Wolfin IB

Covering Types

asphalt, coating, concrete, screed, natural and stone slabs


passenger car, trucks

Formed parts

upstand, membrane upstand, corner piece, T piece, cross piece, transition floor to wall


The sealing and flexible inserts are connected using M8 bolts positioned at intervals of 150 mm.

The sealing insert wich is looking on the sides of the profile out, has to be connected properly with the sealing system. This is very important to get a watertight result of the joint-profile.

Our engineers and technicians can be of assistance during installation on request.

Technical data
Movement horizontal:
80 mm (-30/+50 mm)
Movement vertical:
30 mm (±15 mm)
Visible width:
135 mm
Maximal joint width:
100 mm
Load rating trucks:
600 kN (DIN 1072)
Supply length:
3 mtr
Color of flexible insert:
Technical drawing
va-8-135-22-fk.psd Subject to technical change without notice.
Article No. Profile height Recess (B⨉T)
VA.8.135/22 FK 23 mm 600 ⨉ 33 mm
VA.8.135/37 FK 38 mm 600 ⨉ 48 mm
VA.8.135/42 FK 43 mm 600 ⨉ 53 mm
VA.8.135/52 FK 53 mm 600 ⨉ 63 mm
VA.8.135/62 FK 63 mm 600 ⨉ 73 mm
VA.8.135/92 FK 93 mm 600 ⨉ 103 mm