• high load-bearing capacity
  • flexible to use

Inquiry data sheet

We are also available by phone for further questions.




watertight, resistant to heavy loads, trafficable by fork-lift trucks, expansion insert can be replaced anytime, abrasion, weather and temperature resistant (-40°C bis +120°C), resistant to salt and waste-water (alcalics, microbes, bacteria), agreements may also be made for other sealing sections


outdoor, multi-storey and underground park decks, ramp accesses, pedestrian bridges, all industrial applications


hot-dip galvanised steel substructure and high-grade steel V2A surface, synthetic rubber flexible insert (EPDM), sealing insert made from Wolfin IB

Covering Types

coating, concrete, screed, industrial covering, natural and stone slabs


passenger car, trucks, fork-lifts

Formed parts

upstand, end piece, corner piece, T piece, cross piece, transition floor to wall


The sealing and flexible inserts are connected using M10 bolts positioned at intervals of 150 mm.

The sealing insert wich is looking on the sides of the profile out, has to be connected properly with the sealing system. This is very important to get a watertight result of the joint-profile.

Our engineers and technicians can be of assistance during installation on request.

Technical data
Movement horizontal:
60 mm (±30 mm)
Movement vertical:
30 mm (±15 mm)
Visible width:
128 mm
Maximal joint width:
70 mm
Load rating:
Radlast 5000 kg bei Ø 150 mm, B = 100 mm
Load rating trucks:
600 kN (DIN 1072)
Load rating forklifts:
150 kN (DIN 1055-3)
Supply length:
3 mtr
Color of flexible insert:
Technical drawing
Subject to technical change without notice.
Article No. Profile height Recess (B⨉T)
VA.8.130/30 30 mm 340 ⨉ 40 mm
VA.8.130/37 37 mm 340 ⨉ 47 mm
VA.8.130/45 45 mm 340 ⨉ 55 mm
VA.8.130/60 60 mm 340 ⨉ 70 mm
VA.8.130/75 75 mm 340 ⨉ 85 mm
VA.8.130/90 90 mm 420 ⨉ 100 mm
VA.8.130/104 104 mm 420 ⨉ 114 mm
VA.8.130/120 120 mm 420 ⨉ 130 mm
VA.8.130/150 150 mm 420 ⨉ 160 mm

Other heights on request.