- high load-bearing capacity
- installation in site-mixed concrete
- lightly structured surface with anti-slip effect
We are also available by phone for further questions.
watertight, resistant to heavy loads, trafficable by fork-lift trucks, expansion insert can be replaced anytime, abrasion, weather and temperature resistant (-40°C bis +120°C), resistant to salt and waste-water (alcalics, microbes, bacteria), agreements may also be made for other sealing sections
outdoor, multi-storey and underground park decks, ramp accesses, pedestrian bridges, all industrial applications
hot-dip galvanised steel substructure and high-grade steel V2A surface, synthetic rubber flexible insert (EPDM), sealing insert made from Wolfin IB
coating, concrete, industrial covering
passenger car, trucks, fork-lifts
upstand, end piece, corner piece, T piece, cross piece, transition floor to wall
The sealing and flexible inserts are connected using M8 bolts positioned at intervals of 150 mm.
Grouting profile VP5/20 is already installed at the factory.
The sealing insert wich is looking on the sides of the profile out, has to be connected properly with the sealing system. This is very important to get a watertight result of the joint-profile.
Our engineers and technicians can be of assistance during installation on request.
- Movement horizontal:
- 60 mm (-25/+35 mm)
- Movement vertical:
- 30 mm (±15 mm)
- Visible width:
- 115 mm
- Maximal joint width:
- 56 mm
- Load rating:
- Radlast 3500 kg bei Ø 150 mm, B = 100 mm
- Load rating trucks:
- 600 kN (DIN 1072)
- Load rating forklifts:
- 150 kN (DIN 1055-3)
- Supply length:
- 3 mtr
- Color of flexible insert:
|Article No.||Profile height|