- high load-bearing capacity
- hygienic, smooth insert
- flexible to use
Für weitere Fragen stehen wir auch telefonisch zur Verfügung.
watertight, resistant to heavy loads, trafficable by fork-lift trucks, expansion insert can be replaced anytime, abrasion, weather and temperature resistant (-40°C bis +120°C), resistant to salt and waste-water (alcalics, microbes, bacteria), agreements may also be made for other sealing sections
all industrial applications, areas with increased hygiene standards (e.g. kitchens, hospitals etc.)
hot-dip galvanised steel substructure and high-grade steel V2A surface, synthetic rubber flexible insert (EPDM), sealing insert made from Wolfin IB
asphalt, screed, natural and stone slabs
passenger car, trucks, fork-lifts
upstand, membrane upstand, corner piece, T piece, cross piece, transition floor to wall
The sealing and flexible inserts are connected using M10 bolts positioned at intervals of 150 mm.
The sealing insert wich is looking on the sides of the profile out, has to be connected properly with the sealing system. This is very important to get a watertight result of the joint-profile.
Our engineers and technicians can be of assistance during installation on request.
- Movement horizontal:
- 20 mm (±10 mm)
- Movement vertical:
- 10 mm (±5 mm)
- Visible width:
- 108 mm
- Maximal joint width:
- 50 mm
- Load rating:
- Radlast 5000 kg bei Ø 150 mm, B = 100 mm
- Load rating trucks:
- 600 kN (DIN 1072)
- Load rating forklifts:
- 150 kN (DIN 1055-3)
- Supply length:
- 3 mtr
- Color of flexible insert:
|Article No.||Profile height||Recess (B⨉T)|
|VA.8.110/32 GF||33 mm||1000 ⨉ 43 mm|
|VA.8.110/47 GF||47 mm||1000 ⨉ 57 mm|
|VA.8.110/62 GF||62 mm||1000 ⨉ 72 mm|
|VA.8.110/77 GF||77 mm||1000 ⨉ 87 mm|
|VA.8.110/92 GF||92 mm||1000 ⨉ 102 mm|
|VA.8.110/106 GF||107 mm||1000 ⨉ 117 mm|
|VA.8.110/120 GF||120 mm||1000 ⨉ 130 mm|
|VA.8.110/150 GF||150 mm||1000 ⨉ 160 mm|
Other heights on request.