VA.10.230/.. F
- high load-bearing capacity
- visible surface in high-grade steel
- anti-slip surface
We are also available by phone for further questions.
+49(0)8406/9294-0
Features
watertight, resistant to heavy loads, trafficable by fork-lift trucks, abrasion, weather and temperature resistant (-40°C bis +120°C), resistant to salt and waste-water (alcalics, microbes, bacteria), agreements may also be made for other sealing sections
Applications
outdoor, multi-storey and underground park decks, ramp accesses, pedestrian bridges, all industrial applications
Material
hot-dip galvanised steel substructure and high-grade steel V2A surface, sealing insert made from Wolfin IB
Covering Types
asphalt, screed, natural and stone slabs
trafficability
industrial trucks (lifting trucks, fork-lifts etc.), passenger car, trucks
Formed parts
end piece, membrane upstand, corner piece, T piece, cross piece, transition floor to wall
Notes
The sealing insert wich is looking on the sides of the profile out, has to be connected properly with the sealing system. This is very important to get a watertight result of the joint-profile.
The flanging of the sealing insert with screws M10 at a distance of 150 mm.
This joint profile is also available for a bigger movement.
Our engineers and technicians can be of assistance during installation on request.
- Movement horizontal:
- 100 mm (±50 mm)
- Visible width:
- 230 mm
- Maximal joint width:
- 60 mm
- Load rating:
- Radlast 4000 kg bei Ø 150 mm, B = 100 mm
- Load rating trucks:
- 600 kN (DIN 1072)
- Load rating forklifts:
- 150 kN (DIN 1055-3)
- Supply length:
- 3 mtr
Subject to technical change without notice.| Article No. | Profile height | Recess (B⨉T) |
|---|---|---|
| VA.10.230/52 F | 52 mm | 1000 ⨉ 65 mm |
| VA.10.230/82 F | 82 mm | 1000 ⨉ 95 mm |
Other heights on request.